Tag Archives: tech editing

Grading pattern repeats for garments and larger projects: Part 2 – guest post by Kate Atherley

In a previous column, I talked about ways to place and size pattern repeats for small projects like mittens and I’ve also talked about placement of larger patterns in garments. Now let’s tackle the question of smaller patterns in larger projects.

This sort of thing: Amy Herzog’s February Fitted Pullover (a free pattern on Ravelry).

The Gull Lace pattern stitch used is a 7-stitch repeat, which permits a lot of different possibilities for sizing.


If you’re working at the pattern gauge of 17 stitches per 10cm/4 inches, one pattern repeat is about 4cm/1.5 inches wide. This gives a pretty good scope for creating multiple sizes of a garment: in a multi-size pattern, there’s usually at least 5-8cm/2-3 inches between individual sizes, so you can comfortably create additional sizes by adding or taking away pattern repeats. A smaller repeat provides a fair bit of flexibility to create the sizes you want.  

As the repeats – and the gauge – get larger, grading can get more problematic. A 12-stitch repeat worked at 16 stitches/10cm means that each pattern repeat is 7.5cm/3 inches wide, and so you’re limited to sizes 7.5cm/3 inches apart.

If the pattern repeat size and gauge mean that spacing between sizes is too big, you can consider adjusting the pattern repeat itself, as mentioned in the first column linked above. Or just create plain areas, as mentioned in the second.

In this column, I’m going to focus on working with smaller repeats.

When I’m creating a garment, I always start with the body circumference. When working with a small pattern repeat, I make that the stitches required are an even multiple of the pattern repeat. Easy! And as long as there’s no shaping, it’s all perfect. Which is to say that creating a garment body with no waist or bust shaping is likely the easiest design task you’ve ever taken on.

But if you want sleeves, or a neckline, or waist or bust shaping, you’re going to need to consider how to handle the shaping.

You can take some of the strategies discussed in the previous column, of course: add and work shaping in plain areas.

If you’re adding a few stitches, in a relatively non-obtrusive place – 3 or 4 stitches at the sides, under the arms, for bust shaping – them working them plain in stocking stitch isn’t going to be all that noticeable.

But when you come to something like sleeves, or even armhole or neckline shaping on the body, you’re likely to be increasing or decreasing significantly more than that. And, unlike the examples from the previous column, larger plain areas aren’t desirable, as they will detract from the design.

For example: if it’s a full-length sleeve, you could well be adding about 12 cm/5 inches of width when you increase from the cuff to the top. That’s a lot of plain stitches, and it would significantly change the look of the sleeve. The good news is that because the repeat is small, that sort of extra width is more than enough to add in additional repeats of the pattern.

The trick with this is to try to maximize the pattern area coverage, and minimize the plain areas.


Let’s work through an example, a sleeve. A sleeve worked in this pattern will likely start with a multiple of 7 stitches for the pattern, plus 2 for the selvage.

(Note that sleeve increases are usually spread out more, but in the interests of saving space for this example, I’m showing the pattern with increases every other row. You’ll see how this could also apply, therefore, to other things like shawls.)

This was my first attempt to chart this out: I waited until I had a full seven stitches between the existing patterned area and the selvage, and I started up the pattern in the plain sections once I hit the first row of the Gull Lace pattern again. I’ve highlighted the new patterning in yellow.

But as you can see there’s an awful lot of plain fabric in the shaping section before I introduce the pattern.

Remember that for lace, the pattern relies on yarnover/decrease pairs. And this opens up some wonderful possibilities! If you look at the pattern stitch, you’ll see that each RS row has two of these pairs, which means that each pattern repeat is easily divided into halves – stitches 1 to 3 include one of the yarnover-decrease pairs and stitches 5 to 7 include the other. This gives us an opportunity to add in partial repeats. In row 9 of the increases, there’s already 3 new stitches outside the patterned ahead, so we can add in half repeats.


But there’s no reason at all to wait until you’re back at the first row of the Gull Lace pattern. If you look at the third row, you’ll see that you only actually need 2 stitches for the base lace motif, as it’s worked right at the start/end of the repeat, so you can start adding lace in on row 7 – corresponding to the third row of the Gull Lace. Even more lace and less plain!


And there’s a further opportunity to get clever.

Look at what’s going on in Rows 13 and 15 of the increases, in the chart above. There’s lots of stitches, at first blush it looks like there might enough to place the lace motif. But if you count, you’ll see that the decrease would have to be placed in the same location as the shaping increase…. But this provides an excellent opportunity. In lace, when you work a yarnover, you need to work a decrease to keep the stitch count consistent. And for shaping, you need to add a stitch. So let the lace decrease and shaping increase cancel each other out, and just work the stitch beside the yarnover as a plain knit stitch. In the chart below, I’ve marked this stitch in blue. After all, the most visible part of a lace pattern is a yarnover, so you’re getting as much lace as possible!


And you can employ similar strategies when decreasing, too.


In this example, you’ve got partial repeats worked where space permits. And look at what’s going on in Row 19 – two overlapping decreases become double decreases.

The key to these sorts of tricks is understanding the pattern stitches. For lace, the elements are always a yarnover-decrease pair. When increasing or decreasing around a lace pattern, you have to have room to work both stitches in the pair, of course. But if an increase overlaps with a decrease, they cancel each other out. And if two decreases overlap, then just work a double decrease.

The good news is that lace tends to be one of the more complicated styles in which to manage shaping, because you’ve got to allow for both stitches in the yarnover/decrease pair. For most other patterns, it’s much simpler, since you’re usually just thinking about a single stitch a time.  Think about shaping in ribbing: even if it’s a (k2, p2) ribbing pattern, you don’t need both stitches of the rib to set the pattern.

Let’s look at a cable pattern. If it’s a complex repeat, you can again, build up/decrease away the pattern in sections, as outlined in the previous column. And you can even play with the individual elements…


As before, the simplest solution is, of course, to wait until you’ve got the full number of stitches you need for the cable. But here, too, there’s a bit of room to get creative. If the cable used in the motif is 2 stitches crossed over 2, we could introduce a cable crossing 2 stitches over 1, to retain the overall look when you don’t *quite* have enough stitches.

Remember, the usual goal with garment worked in an all-over pattern stitch is to maximize the pattern stitch, and clever little tricks like this work wonders.

One of the reasons I love Stitchmastery so much is that it allows me to play with these possibilities, saving me significant swatching time and letting me be more creative.

Interview series 6 – Kate Atherley

Interview series 6 – Kate Atherley

In 2017 we ran a survey of Stitchmastery users and one response particularly caught our imagination – someone told us they would like to hear from other Stitchmastery users and how they make use of the software. We’re delighted to bring you a series of interviews with designers, tech editors, magazine editors and teachers –Continue Reading

Interview series 4 – Rosee Woodland

Interview series 4 – Rosee Woodland

Last year we ran a survey of Stitchmastery users and one response particularly caught our imagination – someone told us they would like to hear from other Stitchmastery users and how they make use of the software. We’re delighted to bring you a series of interviews with designers, tech editors, magazine editors and teachers –Continue Reading

“On Short Rows” – a guest post by Kate Atherley

Short rows are an incredibly useful technique in knitting. They’re used to create curves, change stripes, turn corners and add bust shaping. Although simple in principle, they add a fair degree of complication to pattern instructions, and can be a particular challenge when building them into charted patterns. Stichmastery makes the key element of dealingContinue Reading

“On Untidy Row Repeats” – guest blog by Kate Atherley

In my last column, I talked about finding stitch repeats to collapse large charts.  In that situation, there was only one basic pattern motif being worked, and so there was a straightforward solution for reducing the charts. If you have more than one distinct motif, it can get a bit more challenging. I recently designedContinue Reading

“Getting Bigger” – guest post by Kate Atherley

My last couple of columns have been all about dealing with repeats. In this column, I want to talk about finding them, to make your life much easier. A designer posted a terrific question in the Stitchmastery Ravelry forum, about how to create the chart for a triangular shawl. She said that it was takingContinue Reading

“Charting Smocking Patterns” — guest post by Karen Butler

We’re delighted to bring you a guest post from designer and tech editor Karen Butler all about using Stitchmastery to customise stitches when chart smocking patterns. We hope you find it useful and inspiring for the start of a new year! UPDATE April 2018 – Stitchmastery Version 3 has been released and features new toolsContinue Reading

“Moving the Goalposts Part 2” – guest post by Kate Atherley

In my last column I talked about repeats with shifting borders. In this one, I want to focus on a very special case of that situation – repeats worked in the round where they cross over the start of the round. I love designing socks with all-over cables. And in particular it pleases me immenselyContinue Reading

“Moving the Goalposts” – guest post by Kate Atherley

Not all repeats are tidy. I love complicated cable patterns that create all-over cabled fabrics, but there can be some “jiggery pokery” required at the edges of the repeats, to create a seamless effect. For example, look at this cable pattern, taken from Barbara Walker’s book of Charted Knitting Patterns (the yellow one!). Across 28Continue Reading

“There’s Nothing There!” – guest post by Kate Atherley

Stitch patterns with changing stitch counts are probably the most challenging to chart. Stitchmastery offers a flexible tool for handling non-existing stitches: there’s a choice of two symbols (found in the Basic Stitches drawer) – three, really, in that you can actually just have them not there at all. When representing these, there are aContinue Reading