Category Archives: Tutorial

“Grading pattern repeats for garments and larger projects” – guest article by Kate Atherley

In a previous column, I talked about ways to place and size pattern repeats for small projects like mittens. But of course, pattern stitches are often used in garments too.

There are three key differences when designing garments: you’ve got more stitches and therefore a larger canvas, different parts of the garment are more (or less) visible, and you’ve got to consider shaping – armhole/raglan shaping, most often.

There are two types of patterning to consider: a larger motif – which may be composed of several smaller elements – or a single smaller pattern, repeated all over.

A classic “Aran” sweater is a nice example of the first type, and that’s what I’m going to cover in this column. I’ll talk about the second type in the next column.

In a classic Aran sweater, the motif is composed of one or more cable patterns, arranged so that they are centered on the garment pieces – back, front (or both fronts if it’s a cardigan), and even on the sleeves. The motif may fill a small portion of the garment, or most of it. The edges of the garment, those stitches outside the motif, are worked in some sort of ‘background pattern’ – stocking stitch, reverse stocking stitch, or a moss or seed stitch pattern. Grading these patterns is fantastically easy, aided by those background patterns. The absolute simplest path to grading a pattern for a garment is to choose a pattern that fits into the smallest size, and then creating the larger sizes by adding more background stitches.

Norah Gaughan’s Beatnik works like this. Although the cable motif is wide, there are ‘plain’ stitches worked either side, which easily allow for making the garment larger.

Photo of heavily cabled orange jumper by Norah Gaughan.
Designer – Norah Gaughan. Photographer – Chris Vaccaro. Used with permission.

This works very well if there isn’t *that* much difference in size across the range you’re grading – for example, a garment in baby and toddler sizes, a range of sizes for school-age children to pre-teens, or for women.

In this situation, you can make it much easier on yourself and your knitters if you make sure that the central motif fits not only inside the smallest size, but specifically inside the upper body of the smallest size. That is, if there is any shaping to be done for the armholes, that the motif fits inside the body above the armholes – after the shaping if you’re working bottom-up, or before the shaping if you’re working top-down. Any shaping is worked in the background pattern, making it simpler for the knitter to work, and also for you to write up! It avoids the challenge of shaping in pattern, it avoids any confusion about how to handle partial motifs, and leaves you with a plain edge for picking up stitches or seaming.

Karie Westermann’s Incunabula is an excellent example of this sort of design.

Photo of Karie Westermann wearing green cardigan with cable design down front
Designer – Karie Westermann. Photographer – David Fraser. Used with permission.

If you’re creating a garment pattern for a wide range of sizes – babies to teens, or petite women to larger men – you’re going to end up with a scaling issue. That is, a cable that takes up most of the front of a baby sweater is going to be pretty tiny on a large adult sweater, and the garments will look quite different.

In these situations, you could choose to scale the pattern, adding more repeats, expanding it, or making the motif itself larger. Making the motif larger is something I covered in my previous column:

Adding multiple repeats is as it sounds. I particularly like patterns that have smaller repeats embedded within them, like these interlaced cables. They scale easily, but look the same across a wide range of sizes.

Knitting chart showing cabled design

And you can use smaller elements to expand the motif, too, and grade those.

This provides a bit more flexibility with the grading. After all, even in a range of sizes for women, there can be a fair bit of difference between the smallest and largest sizes – you can end up with pretty large swathes of “background”.  Fill some of that background with smaller motifs alongside the main one: a simple rope cable, for example. And you can even scale those motifs; use a 4-stitch twist for the smaller sizes or heavier gauges, a 6-stitch twist for middle sizes, an 8-stitch twist for larger sizes or yarns of a finer gauge.

Using smaller elements like this allow you to fill more of the garment with the lovely pattern, too – so you’ve got less of the ‘boring’ background and more of the good stuff!

Amy Herzog’s Alta uses this strategy nicely.

Photo of woman wearing grey cabled jumper with long sleeves and draped neck.
Designer – Amy Herzog. Photographer – Jonathan Herzog. Used with permission.

These smaller elements can also be used to fill the section of the body that’s under the arms, the section that is decreased away in a bottom-up garment, or increased as you work a top-down garment. You can reduce the amount of “boring background” even more.

Wide knitting chart showing cable design

That way, although you’re shaping within a pattern, you’re shaping in smaller motifs. For example, if you’re working a top down sweater with raglan increases with four-stitch cable elements, start the side motifs as soon as you have four stitches increased. This allows you add patterning early, as opposed to having to wait until you’ve increased enough stitches for a larger pattern motif.

And if you’re working bottom up, of course, keep working the motifs as long as you have enough stitches. If you’ve got a lot of smaller individual motifs, you can keep them going longer and/or start them sooner.

But if you’re using larger patterns – this 36-stitch motif, for example – shaping quickly becomes very complicated.

Knitting chart showing very large cable design
If you had to work decreases into this pattern, you have a tricky decision to make. Once you’ve decreased even two or three stitches, you don’t have enough to work the full cable pattern. Do you attempt to keep a partial pattern going, working only the central part of it, or do you just discontinue the motif entirely? If you opt for the first, it could look untidy, and if you opt for the second, you’ll suddenly have a large plain section where there was previously a pattern. And not only does that change the look of things fairly significantly, but it could also change the size of the piece you’re working: after all, cable fabrics are tighter than non-cable fabrics. And either way, this adds complexity to the knitting, and the instructions themselves.

Next time you’re looking at a cabled sweater, examine how and where the patterns are placed. There’s logic in the blank spaces and pattern fillers, and those little decorative side elements aren’t just there for beauty.

“Customising the Written Instructions” – a guest post by Kate Atherley

One of my absolute favourite features of Stitchmastery is the ability to generate written instructions for charts. After all, not every knitter likes working from charts, and it’s good for a designer to provide the option of working another way. Every designer has their own style sheet, their own format for instructions, things like whetherContinue Reading

“Grading + Pattern Repeats” – a guest by from Kate Atherley

This lesson is little different than some of the others I’ve written: this one is designed to share a little less about how I use Stitchmastery and provide more of an insight into the design process itself. A problem that designers often struggle with – and one that you may well have encountered yourself withContinue Reading

“On Short Rows” – a guest post by Kate Atherley

Short rows are an incredibly useful technique in knitting. They’re used to create curves, change stripes, turn corners and add bust shaping. Although simple in principle, they add a fair degree of complication to pattern instructions, and can be a particular challenge when building them into charted patterns. Stichmastery makes the key element of dealingContinue Reading

Customising the appearance of your stitches in Stitchmastery Version 3

This video explains the new method of customising stitches in Stitchmastery Version 3. If you’ve never created a User Library in Stitchmastery or need more help with the technical side of customising stitches (eg considering how much a stitch consumes and produces, and what the wrong side version should be) read the “Viewing and EditingContinue Reading

Creating your own User Stitch Libraries in Stitchmastery Version 3

  This video explains how to create your own user stitch library in Stitchmastery Version 3. Stitchmastery comes pre-loaded with two default Stitchmastery libraries (also available in German and Danish) which contain many stitches. As you may know, it is not possible to edit these default libraries, so if you want to customise the appearanceContinue Reading

“On Untidy Row Repeats” – guest blog by Kate Atherley

In my last column, I talked about finding stitch repeats to collapse large charts.  In that situation, there was only one basic pattern motif being worked, and so there was a straightforward solution for reducing the charts. If you have more than one distinct motif, it can get a bit more challenging. I recently designedContinue Reading

“Getting Bigger” – guest post by Kate Atherley

My last couple of columns have been all about dealing with repeats. In this column, I want to talk about finding them, to make your life much easier. A designer posted a terrific question in the Stitchmastery Ravelry forum, about how to create the chart for a triangular shawl. She said that it was takingContinue Reading

“Charting Smocking Patterns” — guest post by Karen Butler

We’re delighted to bring you a guest post from designer and tech editor Karen Butler all about using Stitchmastery to customise stitches when chart smocking patterns. We hope you find it useful and inspiring for the start of a new year! UPDATE April 2018 – Stitchmastery Version 3 has been released and features new toolsContinue Reading

“Moving the Goalposts Part 2” – guest post by Kate Atherley

In my last column I talked about repeats with shifting borders. In this one, I want to focus on a very special case of that situation – repeats worked in the round where they cross over the start of the round. I love designing socks with all-over cables. And in particular it pleases me immenselyContinue Reading